PRODUCTS
Your location:Products >> Actuator series >> GT pneumatic actuator
GT pneumatic actuator
Pressure range: 2 to 8 bars for double action and 2 to 8 bars for single action;
Operating temperature: Standard (with nitrile rubber O-ring);
-20 ° C to + 80 ° C rubber O-ring);
-40 deg.] C ~ + 80 deg.] C high temperature (fluorine rubber O-ring);
-20 deg.] C ~ + 150 deg.] C;
Stroke adjustment: adjustable range of ± 4 ° in the 90 ° position;
Using a medium : Compressed air, non-corrosive gases and oils;
Maximum service pressure: The input pressure does not exceed 8 bar.
Product details

First, GT pneumatic actuator product features

  Compact dual-piston gear, rack structure, accurate teeth, smooth transmission, the output torque stability.

  Cylinder for the extrusion of aluminum alloy, and by hard anodizing, the surface texture of hard, strong abrasion resistance.

  The same specifications are double-acting and single-acting (spring reset).

  Pistons and the output shaft are mounted on the movable parts of wear-resistant material support to avoid direct contact between the metal parts to reduce wear and friction.

  Installation, connection dimensions Designed according to international ISO5211, DIN3337 and VDI / VDE3845, interchangeable with common pneumatic actuators.

  Cylinder, end caps, output shaft, spring, fasteners, etc. have been anti-corrosion treatment.

  Output shaft installation Connection hole has a variety of shapes (square hole, flat hole, axial hole) for choice.

  There are room temperature type, high temperature type, low temperature type.

  Single-acting spring pre-compressed easy to install, disassemble, and good safety.

  Beautiful appearance, light texture, with waterproof performance.


 Second, GT pneumatic actuator technical parameters

Technical Parameters
Working medium Dry, clean and not corrosive gases
Working air pressure Double-acting: 4 ~ 8bar
Single-acting: 5 ~ 8bar
Operating temperature Normal temperature type: -20 ~ 80 ℃ (nitrile rubber O-ring)
High temperature type: -20 ~ 160 ℃ (Viton O-ring)
Low temperature type: -40 ~ 80 ℃ (silicone rubber O-ring)
Rotation angle Standard type: 90 ° ± 5 °
Output torque Double-acting: 4 ~ 10560Nm
Single-acting: 6.9 ~ 2668Nm
Cylinder form Double acting, single acting (spring return)
control method Switch, adjustable, three-stage (opening optional)
Attachment options Solenoid valve, air handling triplet, limit switch, hand-operated mechanism, locator


GTD double-acting output torque table (Nm)
model Air pressure (bar)
2 3 4 5 6 7 8
GTD40 3.9 5.8 7.7 9.6 11.5 13.3 15.2
GTD52 8.32 12.48 16.64 20.8 24.96 29.1 33.2
GTD83 29.6 44.4 59.2 74 88.8 103.6 118.4
GTD127 119 178.5 238 297.9 357 416.5 476.5
GTD160 236 354.6 472 591 709 827 945
GTD190 444 667 889 1111 1334 1556 1778
GTD255 1081 1621 2162 2702 3243 3783 4324
GTD300 1662 2493 3326 4156 4987 5818 6650
GTD350 2640 3960 5280 6600 7920 9240 10560
GTE single-acting output torque table (Nm)
Model Number of springs Air pressure (bar) Spring reset
3 4 5
Start End Start End Start End Start End
GTE40 10
12
GTE52 10 9.47 0.84 13.9 5 15.8 6.9
12 12 1.9 18.9 8.2
GTE63 10 14.2 1.3 20.3 7.4 23.1 10.2
12 18.1 2.7 27.8 12.4
GTE83 10 33.8 8.6 48.6 23.4 50.6 25.4
12 44.1 13.8 60.2 29.9
GTE110 10 89 13 126.2 20.2 136 60
12 114.2 18.2 168 72
GTE127 10 139.9 31.7 199.4 91.2 206.3 98.1
12 182.5 52.5 245 115
GTE160 10 299 86 418 205 368 173
12 266 7 385 126 465 206
GTE190 10 362 59 584 281 806 503 608 305
12 529 168 751 390 721 360
GTE210 10 368 147 612 391 857 636 586 365
12 301 29 545 273 790 518 704 432
GTE255 10 732 171 1271 713 1813 1253 1449 889
12 1095 423 1635 963 1739 1067
GTE300 10 1093 53 1926 886 2756 1716 2440 1400
12 1646 397 2476 1227 2929 1680
GTE350 10 3057 1232 4327 2552 4048 2223
12 2612 422 3932 1742 4858 2668


The next：AW pneumatic actuator
The previous：AT pneumatic actuator